Nowadays, stone honeycomb panel is more and more popular in architecture application. Following 8 reasons to choose stone honeycomb panel for architecture application.

The marble composite panel can be 5mm (Compounded with aluminum honeycomb panel), the thickness of ceramic/granite composite panel is just 12mm, Because of lightweight, it can save a lot of transportation cost. The reduced weight of the panel also means less load stress is applied to the building or structure, It’s the most appropriate choice when there is load limited for building structure.

With the combination of marble, ceramic tile, granite, and aluminum honeycomb panel, the intensity of stone honeycomb panel is better than the traditional stone slab. The bending resistance and shear resistance are obviously improved, which greatly reduces the damage rate during transportation, installation, and use.

Ordinary marble original board (general bodyboard) is installed by cement wet stick generally, very likely half a year or a year later, marble surface appears all sorts of different change color and besmirch, purify hard. The stone honeycomb panel avoids this because the aluminum base sheet is harder and denser, and there is also a thin layer of glue.

The marble honeycomb panel is split into 3 pieces or 4 pieces slice with 3M² or 4M² using a 1M² original slab. The pattern and color of these 3M² or 4M² slice is almost 100% the same, so it is easier to ensure the consistency of color and pattern when a large area is used.

Lightweight, high rigidity (not easy breakable) less color difference property make installation easier, safer and faster, reduce installation cost.

The stone aluminum honeycomb panel is made of aluminum honeycomb panel and stone veneer. It has the properties of sound insulation, moisture proof, heat insulation and cold resistance because of its hollow hexagonal honeycomb core structure. The air layer between skin sheets is also divided into a plurality of closed cells, preventing air flow, and heat is difficult to convert and transmit. In this structure, the propagation of sound waves is also greatly limited.

The stone aluminum honeycomb panel is made of aluminum honeycomb panel and stone veneer. It has the properties of sound insulation, moisture proof, heat insulation and cold resistance because of its hollow hexagonal honeycomb core structure. The air layer between skin sheets is also divided into a plurality of closed cells, preventing air flow, and heat is difficult to convert and transmit. In this structure, the propagation of sound waves is also greatly limited.

Because of its sound insulation, moisture resistance and thermal insulation property, the stone aluminum honeycomb panel can greatly reduce the consumption of electric energy and heat energy after being installed as the curtain wall.

Because of lightweight and thinness, the stone honeycomb panel saves some cost in the transportation and installation. Moreover, for more expensive stone varieties, price for stone honeycomb panels are made to varying degrees cheaper than the original stone slab.